The Long-Term Energy Storage Challenge: Batteries Not Included

Three technologies are emerging as superior grid-scale energy storage solutions.

Battery storage technologies seem to be the hot topic wherever you look in the energy industry. Germany is investing heavily into domestic storage, California has a huge mandate, and the market for peak-shifting and storing production is gaining the interest of consumers, "prosumers" and network operators alike.

But can battery storage really solve some of the issues faced by the growing penetration of intermittent solar and wind technology? In the short term, it probably can, but as the penetration of renewables starts to grow in major economies, many think that battery storage at such scale will  either simply be too expensive or not have enough capacity to solve some of the long-term issues.

Three new technologies are now emerging as potential long-term solutions, and proponents of all three argue that they will be cost-competitive and even displace some of the gas generation that is normally assumed to fill the gaps.

Here’s a brief look at these emerging technologies.

Chemical Energy Storage

In Germany, many believe that the only way to provide the amount of storage needed for a nearly fully renewable grid in the long term is through chemical means. Right now, there are a number of projects that are seeking to apply electrolysis to turn excess output from wind and solar and other generation into hydrogen and methane.

At the Fraunhofer Institute for Solar Energy Systems in Freiburg, Dr. Gunter Ebert says hydrogen and methane are the only options for large-scale “season storage.” A battery can provide some short-term storage capacity, maybe up to 50 gigawatt-hours, as can pumped hydro, but “we need a tremendous amount of long-term storage -- up to 70 terawatt-hours,” according to Ebert. “That can only be done with hydrogen and methane.”

Ebert’s plan is to use caverns to store hydrogen, which can then be used for vehicles or in fuel cells. Alternatively, it can be converted into methane for use in the gas grid, or it can be used for direct heat and power generation, as shown in the following graph.

As Craig Morris reported on the Energiewende blog last week, the German company Thüga has exported the first hydrogen created from electrolysis to the natural gas network. The firm says it plans to go into official operation at the beginning of 2014 after a test run. The practical test under operating conditions will last for nearly three years, continuing through the end of 2016. The unit under investigation has a power capacity of 315 kilowatts and can produce 60 cubic meters of hydrogen per hour.

Ebert says there are still many possibilities about how such a scheme could be put together, but he contends that some form of long-term storage will be needed after 2020, when the share of renewables grows beyond 40 percent and more thermal generation is sidelined.

Compressed Air Energy Storage

The second big technology that is being looked at is compressed air energy storage, also known as CAES. The Boston-based firm General Compression last year opened a 2-megawatt/500-megawatt-hour pilot plant in Texas last year, and its representatives have made three trips to Australia this year to talk to utilities, renewable energy developers, and government representatives about their technology.

Development officer Peter Rood says CAES would work best at the utility scale with 10 megawatts to 100 megawatts. It requires below-ground storage, either natural or man-made, and could work with storing the output of wind energy, or even as a “storage bank” for thousands of rooftop and other distributed solar systems.

Rood said that CAES will help wind energy act like a flexible gas-fired power station, providing baseload and peaking generation when needed, and storing energy produced on some windy days for use later in the week -- or even the month.

That means it would not only be able to mimic the services delivered by gas turbines, but it would also be able to compete with even combined-cycle gas turbines as gas prices head above $10/MMBTU.

“I think there will be a pretty compelling case to build wind plus storage,” he added, noting that a lot of thermal generation is aging, and a renewables-focused energy system will need storage and other ancillary services, such as frequency, that such a system could provide.

General Compression is working on a model that will provide around 20 megawatt-hours to 40 megawatt-hours of storage for each megawatt of peak power production. For a 100-megawatt wind project, the ideal would be to have a facility that could deliver between 200 megawatt-hours and 400 megawatt-hours of storage. CAES would be able to deliver this at a quarter of the price of battery technologies, according to Rood.

General Compression also has a proposal for a “solar bank,” which would allow solar households to store excess energy, and either draw down that energy when needed or sell it other users. (See more on that idea here).

General Compression has received some funding from interesting sources, including oil giant ConocoPhillips and the largest utility in the U.S., Duke Energy.

Pumped Hydro 

Another option is pumped hydro, a technology that is being pursued by the Melbourne Energy Institute and separately by the Australian National University (ANU). Australia already has some pumped hydro  (it’s a key element of the Snowy River Hydro Scheme) but the new approach looks at siting pumped hydro storage away from natural watercourses and using natural contours to situate two reservoirs at different elevations that could be used to store energy, thus negating the need to curtail output from wind farms.

Andrew Blakers of the ANU says there are numerous sites along the Eastern Seaboard, and elsewhere, that could lend themselves to pumped storage -- and he is proposing that a survey should be done to identify those sites. A joint study by the engineering and consulting company Arup and the University of Melbourne Energy Institute suggested that the best approach may be pumping seawater up to coastal cliff tops, as has been done in a pilot facility in Japan (pictured below).

The irony is that pumped hydro was once built to support coal and nuclear and to ameliorate their inability to ramp up quickly to meet changes in demand. Now those energy sources will be used to absorb and manage changes in supply. The MEI/Arup investigations found the benefits included stabilizing and reducing wholesale electricity prices
, increasing the spread of renewable energy, reducing the need to expand electricity transmission, and improving grid operations.

A report by Blakers and colleague James Pittock found that pumped hydro could even by produced from pairs of oversized “farm dams” located close to each other at different elevations. They noted that the cost of these systems is much more heavily weighted to power production (pump/turbines, pipes and tunnels, and interconnection to the grid) than to energy storage (dams and lakes).

“Pumped hydro storage is efficient, flexible, economical and commercially available on a vast scale. Indeed, it is the only large-scale storage technology currently available to the electricity industry,” the authors stated, going on to note that competing storage techniques, such as compressed air, high-temperature thermal storage in conjunction with concentrating solar thermal, and advanced batteries, are considerably more costly or less developed.

Blakers said there are only around 200 large pumped hydro systems in the world, with a total capacity of around 130 gigawatts.

***

Editor's note: This article is reposted in its original form from RenewEconomy. Author credit goes to Giles Parkinson.